Seat Leon 2013 Workshop Manual page 67

Continuation for all vehicles
– Insert a screwdriver -1- into brake disc between brake caliper
and brake carrier.
– Fasten the engine and gearbox jack - VAS 6931- to the support
- T10149- -2- with the aid of a wheelbolt on the wheel hub.
WARNING
♦ Do not raise or lower the vehicle while the engine and
gearbox jack - VAS 6931- is positioned under the vehicle.
The vehicle could slip of the platform.
♦ Do not leave the hydraulic jack - VAS 6931- underneath
the vehicle longer than necessary.
– Separate the threaded steering knuckle/suspension strut un‐
ion -arrow-.
– Fit Separator device - 3424- in the steering knuckle groove.
Note
Make sure that the splitter - 3424- is only inserted into the wheel
bearing housing. Insert sufficiently to ensure that the metal tab of
the suspension strut is not damaged.
– Turn ratchet handle through 90° and detach from splitter -
3424- .
– Press brake disc towards suspension strut by hand.
Otherwise the shock absorber tube can cant in the bore of the
wheel bearing housing.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
3. Suspension strut, upper suspension link
61