Seat Leon 2013 Workshop Manual page 232

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
7.1.3 Assembly overview - suspension, multi-link suspension, four-wheel drive
1 - Drive shaft
2 - Bolt
❑ Always renew after re‐
moving
❑ 90 Nm +90°
3 - Wheel bearing housing
❑ Removing and installing
⇒ page 232
4 - Bonded rubber bush
❑ Renew ⇒ page 245
5 - Brake disc
❑ Removing and installing
⇒ Brake system; Rep.
gr. 46 ; Rear brakes;
Assembly overview -
rear brakes
6 - Bolt
❑ Specified torque ⇒
Brake system; Rep. gr.
46 ; Rear brakes; As‐
sembly overview - rear
brakes
7 - Bolt
❑ Loosening and tighten‐
ing ⇒ page 266
❑ Always renew after re‐
moving
❑ Before securing, clean
threads in stub axle us‐
ing a thread tap
❑ 200 Nm +180°
8 - Wheel bearing unit
❑ Removing and installing
❑ The wheel bearing and wheel hub are assembled in one housing.
❑ This wheel bearing is maintenance-free and has zero play. Carrying out adjustment and repair work is
therefore not possible!
9 - Bolt
❑ Specified torque ⇒ Brake system; Rep. gr. 46 ; Rear brakes; Assembly overview - rear brakes
10 - Heat shield
❑ Removing and installing ⇒ Brake system; Rep. gr. 46 ; Rear brakes; Assembly overview - rear brakes
226
Rep. gr.42 - Rear suspension
⇒ page 243