Seat Leon 2013 Workshop Manual page 182

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Insert mounting pins - T10552/1- -2- in holes of rear axle
-arrows A-.
– Secure support - T10552/2- -3- on rear axle using tensioning
strap -4-.
Installing locating pins - T10096-
In order to secure to the subframe, the locating pins must be
screwed in sequentially on positions -1- on both sides - T10096-
of the vehicle.
– Unscrew one hexagon bolt -1- on both sides.
Note
The figure only shows the left-hand side of the vehicle for greater
clarity.
176
Rep. gr.42 - Rear suspension