Seat Leon 2013 Workshop Manual page 151

– Remove rear silencer of exhaust system ⇒ Rep. gr. 26 ; Ex‐
haust pipes/silencers; Assembly overview - silencers .
Vehicles with vehicle level senders
– Unplug the electrical connector -1-.
Continuation for all vehicles
– Unplug electrical connector -1- from ABS speed sensor on
both sides and move clear.
– Disconnect the electrical connector -2-right and left of the en‐
gine of the electromechanical parking brake on the brake
caliper.
– Detach electrical wiring harness from retainers -arrows- and
move clear.
– Pull out retaining clip -1- on both sides of vehicle.
– Move brake line clear of retainer.
Note
Do not open brake line.
– Use tensioning straps - T10038- to strap vehicle to support
beams of lifting platform on both sides.
WARNING
If the vehicle is not strapped down, it may slip off the lifting
platform!
– Fix subframe at both forward bolts
Running gear, axles, steering - Edition 06.2018
⇒ page 169 .
León 2013 ➤ , León ST 2013 ➤
145
1. Rear axle