Seat Leon 2013 Workshop Manual page 57

♦ Engine and gearbox jack - VAS 6931-
♦ Torque wrench - V.A.G 1332-
Removing
– Turn steering wheel to straight-ahead position and remove ig‐
nition key so that the steering lock engages.
– To prevent unintentional turning, secure steering wheel in
straight-ahead position with adhesive tape -arrow-.
Note
Only use adhesive tape that can be completely removed af‐
♦
terwards without leaving marks.
Do not turn steering wheel while performing repair work, as
♦
otherwise airbag coil connector and return ring with slip ring -
F138- could be damaged.
Vehicles with keyless locking and starting system "Keyless Ac‐
cess"
– Switch off ignition and open driver's door so that the steering
lock engages.
Continuation for all vehicles
– Disconnect battery ⇒ Electrical system; Rep. gr. 27 ; Battery;
Disconnecting and connecting battery .
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
51
2. Subframe