Seat Leon 2013 Workshop Manual page 248

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Pry off grease cap.
1 - Wheel hub cover extractor - VW 637/2-
– Remove brake mount with brake caliper and fasten to body
with wire ⇒ Brake system; Rep. gr. 46 ; Rear brake; Assembly
overview - rear brake .
Note
Hang up brake calliper on body.
– Remove bolt for brake disc and remove brake disc.
– Unscrew bolt -1- using socket - T10162 A- -2-.
Caution
Do not use an impact driver when removing bolt -1- with socket
- T10162 A- -2-!
– Pull wheel bearing unit off stub axle.
Caution
• Avoid soiling and damage to seal when placing on a sur‐
face/storing away.
Wheel bearing -1- must always be pointing upwards.
– Always place wheel bearing unit on wheel hub -2-.
Installing
Installation is carried out in reverse order, noting the following:
242
Rep. gr.42 - Rear suspension