Seat Leon 2013 Workshop Manual page 266

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Remove bolts -arrows- for anti-roll bar -1-.
– Pull anti-roll bar -1- off subframe -2- and swing it downwards.
– Unscrew nut -1- and pull out bolt -2- securing shock absorber.
– Unscrew nut -3- and pull out bolt -4- securing wheel bearing
housing.
– Unscrew bolt -1- for track rod -2- and remove.
– Unbolt drive shaft from gearbox flange.
– Swing wheel bearing housing outwards and pull drive shaft out
of gearbox flange.
– Swing drive shaft downwards and remove from wheel bearing.
If the drive shaft cannot be pulled out of the wheel bearing by
hand, use press tool - T10520- .
Before using press tool - T10520- ensure that thrust piece -1- is
inserted.
260
Rep. gr.42 - Rear suspension