Seat Leon 2013 Workshop Manual page 365

1 - Wire
❑ Different versions possi‐
ble. Refer to ⇒ Electron‐
ic parts catalogue "ET‐
KA"
2 - Bolt
❑ Either 3x or 4x are fitted
depending on engine
version. Refer to ⇒
Electronic parts cata‐
logue "ETKA"
❑ 8 Nm
3 - Heat shield
❑ Assembly overview
⇒ page 361
❑ Different versions possi‐
ble. Refer to ⇒ Electron‐
ic parts catalogue "ET‐
KA"
❑ With power steering
control unit - J500-
❑ Can be checked using
⇒ Vehicle diagnostic
tester in "Guided fault
finding" mode.
4 - Steering rack
❑ Removing and installing
⇒ page 362
❑ Different versions possi‐
ble. Refer to ⇒ Electron‐
ic parts catalogue "ET‐
KA"
❑ With power steering
control unit - J500-
❑ With power steering
control unit - J500-
Note
If a new steering box has been in‐
stalled, the mounting holes of the
heat shield have not yet been dril‐
led. These are drilled when inserting
the bolts of the shield
⇒ Item 11 (page 360)
5 - Right wheel bearing housing
6 - Nut
❑ Always renew after removing
❑ 20 Nm +90°
7 - Bolt
❑ Always renew after removing
❑ 70 Nm +90°
8 - Subframe
9 - Left wheel bearing housing
10 - Seal
❑ Renew after removing steering rack
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
359
3. Steering rack