Seat Leon 2013 Workshop Manual page 265

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Vehicles with vehicle level senders
– Remove bolts -1-.
– Remove retainer for rear left vehicle level sender -2-.
Vehicles with adaptive chassis control DCC
– Disconnect connector -1- on shock absorber -2-.
– Pull line -3- off shock absorber -2- -arrow-.
Note
If there is moisture in the area of the connector, blow compressed
air on the contacts on the shock absorber and the connector.
Vehicles with stone deflector
– Remove spreader rivets -1-.
– Remove bolts -2- for stone guard -3-.
Continuation for all vehicles
– Unscrew nut -1- securing coupling rod -2-.
– Pull coupling rod -2- out of anti-roll bar -3-.
259
8. Drive shaft