Seat Leon 2013 Workshop Manual page 257

Continuation for all vehicles
– Position engine and gearbox jack - VAS 6931- -1- under track
rod and press upwards slightly.
– Remove bolts -2- and -3- one after the other.
– Remove engine and gearbox jack - VAS 6931- -1- under the
track rod.
– Detach wire -2- from mounting bracket -1-.
– Mark installation position of mounting bracket -1- on body.
– Remove bolts -arrows-.
– Take out trailing arm with mounting bracket.
Installing
Installation is carried out in reverse order, noting the following:
– Tighten bolts -arrows- onto old impression marks or previously
applied marks.
– Secure line -2- on mounting bracket -1-.
– Position engine and gearbox jack - VAS 6931- -1- under track
rod and press upwards slightly.
– Screw in bolts -2- and -3- hand-tight.
– Remove engine and gearbox jack - VAS 6931- -1- under the
track rod.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
7. Wheel bearing, trailing arm
251