León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
– Use the adjusting screws -1-, -2- and -3- to bring spirit levels
-A- and -B- on - VAS 6430/3- horizontal.
– Adjust mirror -4- by means of crank handle -arrow- in such a
way that the laser beam hits the sensor lens in the middle.
– Position the mirror on side of the alignment beam so that the
laser beam contacts the centre of the sensor lens.
– Turn fine adjuster screw -5- until display on wheel alignment
computer is within tolerance.
328
Rep. gr.44 - Wheels, tyres, vehicle geometry