Seat Leon 2013 Workshop Manual page 112

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Using press tool - T10520- :
– To be able to press out the drive shaft -3-, secure press tool -
T10520- -1- to the wheel hub -2- using 3 wheel bolts.
– It is essential to follow specified sequence.
I - Tighten knurled nut -1- hand-tight.
II - Turn only bolt -2- using a spanner in order to press out drive
shaft with press tool - T10520- .
Note
At the end of the procedure or for pressing out drive shaft further
the spindle must be moved to its original position in order to de‐
ploy the hydraulic force!
– Remove drive shaft.
Installing
Installation is carried out in reverse order, noting the following:
106
Rep. gr.40 - Front suspension