♦ or adjustment system, basic set - VAS 6430/1-
♦ ACC reflector panel - VAS 6430/10-
♦ Wheel alignment computer
Note
Before driving vehicle onto wheel alignment platform, make
♦
sure there is sufficient space between vehicle and setting de‐
vice - VAS 6430- . The distance between setting device - VAS
6430/10- and the sensor must be 120 cm ± 2.5 cm.
If the available space is not adequate, move the vehicle back‐
♦
wards onto the axle measurement platform in order to be able
to use a corresponding space.
If the position of the ACC reflecting mirror - VAS 6430/10- on
♦
alignment beam is changed during the adjustment work, the
setting of adjustment device - VAS 6430- must always be
checked (e.g. spirit levels, individual toe values on adjusting
beam, etc.).
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
331
3. Adaptive cruise control