Seat Leon 2013 Workshop Manual page 253

Vehicles with vehicle level senders
– Remove screws -1-.
– Remove retainer for rear left vehicle level sender -2-.
Vehicles with stone deflector
– Remove spreader rivets -1-.
– Remove bolts -2- for stone guard -3-.
Continuation for all vehicles
– Remove spring ⇒ page 215
Pressing out bonded rubber bush
1 - Nut - 3346/3-
2 - Thrust plate from assembly tool - 3301-
3 - Actuating arm - 3390-
4 - Sleeve from assembly tool - 3350-
5 - Nut
6 - Spindle - 3346/2-
– Pull out bonded rubber bush by turning nut - 3346/3- -1-. When
doing this, counterhold spindle - 3346/2- -6-.
Insert the bonded rubber bush
Running gear, axles, steering - Edition 06.2018
.
León 2013 ➤ , León ST 2013 ➤
7. Wheel bearing, trailing arm
247