Drive Shaft; Assembly Overview - Drive Shaft - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
8

Drive shaft

⇒ "8.1 Assembly overview - drive shaft", page 256
⇒ "8.2 Removing and installing drive shaft", page 257
⇒ "8.3 Dismantling and assembling drive shaft", page 261
⇒ "8.4 Loosening and tightening threaded connections of drive
shaft", page 266
⇒ "8.5 Checking outer constant velocity joint", page 268
⇒ "8.6 Checking inner constant velocity joint", page 269
8.1

Assembly overview - drive shaft

1 - Outer constant velocity joint
❑ Always replace com‐
pletely
❑ Removing ⇒ page 264
❑ Installing: drive onto
shaft to stop using plas‐
tic hammer
❑ Distribute grease filling
evenly in joint
❑ Checking ⇒ page 268
2 - Bolt
❑ Always renew after re‐
moving
❑ Before securing, clean
the threads in the CV
joint using a thread tap
❑ 200 Nm +180°
⇒ page 266 .
3 - Drive shaft
❑ Assignment ⇒ Electron‐
ic parts catalogue
4 - Clamp
❑ Always renew after re‐
moving
❑ Tightening ⇒ page 266
5 - Dust guard
❑ Check for splits and
chafing
❑ Material: Hytrel (poly‐
ester elastomer)
6 - Clamp
❑ Always renew after re‐
moving
❑ Tightening ⇒ page 266
7 - Dished spring
❑ With internal groove
❑ Installation position
8 - Retaining ring
❑ Always renew after removing
256
Rep. gr.42 - Rear suspension
Volkswagen Technical Site: http://vwts.ru http://vwts.info
⇒ page 264