Table of Contents
Advertisement
Opening and closing the
sliding/tilting electric panoramic
sunroof
Fig. 41
In the interior roof: turn the knob to
open and close
In the interior roof: turn the knob to
Fig. 42
raise and to close the sunroof
To raise the sliding/tilting sunroof, the knob
must be in the basic position
54
Function
Fully open-
ing the slid-
ing sunroof:
Put the slid-
ing sunroof
in conven-
ience posi-
tion:
To set the in-
termediate
position:
Fully closing
the sliding
sunroof:
To raise the
tilting sun-
roof com-
pletely:
To stop auto-
matic opera-
tion:
To close
completely:
The sliding/tilting sunroof only works when
switched on. After switching off, it is still pos-
.
1
sible to open or close the sliding/tilting sun-
roof during a short space of time provided
Operation
›››
Fig. 41
Action
or
›››
Fig. 42
turn the know beyond
position 2 and hold it in
that position until the
3
sunroof reaches the re-
quired position.
2
Turn the knob to the re-
quired position.
to
2
1
1
briefly press the rear part
4
of the knob.
Press or pull the knob
or
4
5
again briefly.
briefly pull the rear part
5
of the knob.
that neither the driver nor passenger door is
opened.
All operations are interrupted when the rotary
knob is actuated.
If it were not possible to close the sliding/tilt-
ing sunroof electrically, it would need to be
closed manually. It is not possible to do an
emergency close of the sliding/tilting sun-
roof without removing components of the ve-
hicle. In such a case, obtain professional as-
sistance.
Sliding blind
With the roof grab handle situated in the rear
part of the roof opening, it is possible to
move the sliding blind to the required posi-
tion.
Note
The convenience position permits sufficient
ventilation with a level of sound produced by
low wind.
Anti-trap function of the
sliding/tilting electric panoramic
sunroof
The anti-trap function can reduce the risk of
injury when closing the sliding/tilting electric
›››
panoramic sunroof
. If the sliding/tilting
Advertisement
Table of Contents
