Seat Leon 2013 Workshop Manual page 200

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Vehicles with stone deflector
– Remove spreader rivets -1-.
– Remove bolts -2- for stone guard -3-.
Continuation for all vehicles
– Position engine and gearbox jack - VAS 6931- under trans‐
verse link.
– Press transverse suspension link upwards slightly.
– Undo nuts -1- and -3- and pull out bolt -4-.
– Pull coupling rod -2- out of anti-roll bar and trailing arm.
Installing
Installation is carried out in reverse order, noting the following:
– Insert coupling rod -2-, fit nuts -1- and -3- and tighten in unla‐
den position ⇒ page 8
– When tightening nut -1-, counterhold at multi-point socket of
bolt.
Specified torques
♦ ⇒ "4.1 Assembly overview - anti-roll bar", page 190
194
Rep. gr.42 - Rear suspension
.