Seat Leon 2013 Workshop Manual page 171

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Installing
– Note correct position of bonded rubber bush -1- relative to axle
beam -2-.
Lug -arrow A- on bonded rubber bush -1- must point towards
notch -arrow B- on axle beam -2-.
– Fit special tools as shown in illustration.
1 - Spindle - T10254/5-
2 - Nut - T10254/4-
3 - Hydraulic press - VAS 6178- and thrust piece - T10205/13-
4 - Thrust piece - T10495/1-
5 - Metal/rubber bearing
6 - Tightening plate - T10495/3-
7 - Nut - T10254/4-
165
2. Axle beam