Seat Leon 2013 Workshop Manual page 216

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
♦ Spring retainer - V.A.G 1752/3A-
♦ Adapter - V.A.G 1752/9- , not illustrated
Special tools and workshop equipment required
♦ Tensioning strap - T10038-
Removing
– Remove rear wheel on affected side.
– Use tensioning straps - T10038- to strap vehicle to support
beams of lifting platform on both sides.
1 - Tensioning strap - T10038-
WARNING
If the vehicle is not strapped down, it may slip off the lifting
platform.
– Remove rear wheel housing liner ⇒ General body repairs,
exterior; Rep. gr. 66 ; Wheel housing liner; Removing and
installing rear wheel housing liner .
Vehicles with vehicle level senders
– Remove bolts -1-.
– Remove retainer for rear left vehicle level sender -2-.
Vehicles with adaptive chassis control DCC
– Disconnect connector -1- on shock absorber -2-.
– Pull line -3- off shock absorber -2- -arrow-.
Note
If there is moisture in the area of the connector, blow compressed
air on the contacts on the shock absorber and the connector.
210
Rep. gr.42 - Rear suspension