Seat Leon 2013 Workshop Manual page 367

6 - Right wheel bearing housing
7 - Nut
❑ Always renew after removing
❑ 20 Nm +90°
8 - Subframe
9 - Bolt
❑ Always renew after removing
❑ 70 Nm +90°
10 - Left wheel bearing housing
11 - Fastener
3.1.3 Assembly overview - steering rack, track rods
1 - Left track rod ball joint
❑ Installation position
⇒ page 383
❑ Removing and installing
⇒ page 384
❑ Installation position
⇒ page 383
❑ Corresponding to ⇒
Electronic parts
catalogue"ETKA"
2 - Nut
❑ To tighten and loosen
the nut it is necessary to
block the ball joint with a
spanner
❑ 70 Nm
3 - Clamp
4 - Dust guard
❑ Must not be twisted after
toe setting has been ad‐
justed.
❑ Removing and installing
⇒ page 378
5 - Clamp
❑ Renew
❑ Tightening ⇒ page 381
6 - Connecting rod
❑ Removing and installing
⇒ page 381
❑ 100 Nm
7 - Threaded sleeve
❑ Removing and installing
⇒ page 385
8 - Steering rack
❑ Corresponding to ⇒ Electronic parts catalogue"ETKA"
❑ Removing and installing
Running gear, axles, steering - Edition 06.2018
Volkswagen Technical Site: http://vwts.ru http://vwts.info
⇒ page 362
León 2013 ➤ , León ST 2013 ➤
3. Steering rack
361