Seat Leon 2013 Workshop Manual page 43

♦ Press tool - VW 412-
Renewing bonded rubber bushes for pendulum support
– If fitted, remove front noise insulation ⇒ General body repairs,
exterior; Rep. gr. 66 ; Noise insulation; Assembly overview -
noise insulation .
– Remove hexagon nut -1- from coupling rod -3- (left and right
sides).
– Pull out coupling rod -3- from anti-roll bar -2- on left and right
side.
– Remove bolts -1- for anti-roll bar.
• Leave the anti-roll bar in its installation position in the vehicle.
– Remove pendulum support ⇒ Rep. gr. 10 ; Assembly mount‐
ings; Removing and installing pendulum support .
Pressing out bonded rubber bush
– Fit assembly tool - VAS 6779- to subframe as shown in illus‐
tration.
– Place thrust piece for removal - VAS 6779-1- -1- on bonded
rubber bush so that flattened side -arrow- faces to direction of
travel.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
37
2. Subframe