Seat Leon 2013 Workshop Manual page 108

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
6.2.3 Assembly overview - drive shaft, triple roller joint AAR3300i
1 - Bolt
❑ Always renew after re‐
moving
❑ Loosening and tighten‐
ing ⇒ page 120
❑ Before securing, clean
the threads in the CV
joint using a thread tap
❑ 200 Nm +180°
2 - Outer constant velocity joint
❑ Always replace com‐
pletely
❑ Removing ⇒ page 134
❑ Installing: drive onto
shaft with plastic mallet
until compressed retain‐
ing ring seats.
❑ Checking ⇒ page 137
3 - Retaining ring
❑ Always renew after re‐
moving
❑ Insert in groove in shaft
4 - Clamp
❑ Always renew after re‐
moving
❑ Tightening ⇒ page 136
5 - Dustguard for constant ve‐
locity joint
❑ Check for splits and
chafing
❑ Material: Hytrel (poly‐
ester elastomer)
6 - Clamp
❑ Always renew after removing
❑ Tightening ⇒ page 137
7 - Drive shaft
8 - Triple roller star with rollers
The chamfer -arrow- points towards drive shaft splines.
❑ Removing ⇒ page 134
9 - Retaining ring
❑ Always renew after removing
❑ Insert in groove in shaft
10 - Clamp
❑ Always renew after removing
❑ Tightening ⇒ page 137
11 - Dustguard for tripod type joint
❑ Check for splits and chafing
102
Rep. gr.40 - Front suspension