Seat Leon 2013 Workshop Manual page 181

– Loosen mounting pins - T10552/1- -3- at bottom on both sides.
– Set dimension -c-.
c - 47 mm
– Turn threaded sleeve of mounting pins - T10552/1- -3- on both
sides to set dimension -d-.
d - 215 mm
– Place rear axle support - T10552- -1- on engine and gearbox
carrier - VAS 6931- .
– Tighten bolt -arrow- to 30 Nm.
– Position rear axle support - T10552- -1- with engine and gear‐
box jack - VAS 6931- -5- under rear axle and jack up.
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
175
3. Subframe