Preparing For Measuring - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
• Windscreen washer fluid reservoir must be full.
• When checking wheel alignment, ensure that sliding plates
and turn tables are not touching end stop.
Please note the following:
• The test equipment must be properly adjusted and attached
to the vehicle; observe device manufacturer's operating in‐
structions.
If necessary, ask the manufacturer to show you how to use the
wheel alignment machine.
Wheel alignment platforms and wheel alignment computers can
lose their original calibration over a period of time.
Wheel alignment platforms and computers should be checked
and adjusted as necessary during inspection and maintenance at
least once per year!
– Handle these highly sensitive devices carefully and conscien‐
tiously.
1.3

Preparing for measuring

⇒ "1.3.1 Test preparations, wheel alignment with no driver assist
systems", page 292
⇒ "1.3.2 Test preparations, wheel alignment with driver assist
systems", page 294
1.3.1 Test preparations, wheel alignment with no driver assist systems
292
Rep. gr.44 - Wheels, tyres, vehicle geometry