Seat Leon 2013 Workshop Manual page 76

León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
Continuation for all vehicles
– Unscrew nuts -arrows-.
– Pull suspension link out of swivel joint and turn wheel bearing
housing to outside to relieve suspension link.
– Unscrew bolts -arrows-. Counterhold at rear bolt on nut at top
while doing so.
– Swivel suspension link -1- to rear and pull out of subframe in
-direction of arrow-.
Installing
Installation is carried out in reverse order, noting the following:
– Insert rear suspension link -1- into subframe in
-direction of arrow- and swivel forwards.
Note
The new rear bolt must be secured with a new nut.
70
Rep. gr.40 - Front suspension