Rear Window Glass - Subaru Legacy 2003 Service Manual

GLASS/WINDOWS/MIRRORS

13.Rear Window Glass

A: REMOVAL
1) Disconnect connectors from rear defogger ter-
minals.
2) Remove glass in the same procedure as for
windshield glass. <Ref. to GW-19, REMOVAL,
Windshield Glass.>
B: INSTALLATION
1) Bond dam rubber and matching pin.
( 1 )
( 2 )
14.5
R15
( 4 )
(1) Locating pin
(2) Dam rubber
(3) Fastener
(4) Unit: mm (in)
2) Install glass in the same procedure as for wind-
shield glass. <Ref. to GW-18, INSTALLATION,
Rear Regulator and Motor Assembly.>
3) Connect rear defogger terminals.
4) After completion of all work, allow vehicle to
stand for about 24 hours.
NOTE:
For minimum drying time and time the vehicle must
be left standing before driving after bonding, follow
instructions or instruction manual from the adhe-
sive manufacturer.
REAR WINDOW GLASS
5) After curing of adhesive, pour water on external
surface of vehicle to check that there are no water
leaks.
NOTE:
When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
14.5
( 3 )
17.5
GW-00120
GW-26