Subaru Legacy 2004 Service Manual page 2733

CLUTCH SYSTEM
3. Flywheel
A: REMOVAL
1. EC, EK AND KA MODEL
1) Remove the transmission assembly. <Ref. to
5MT-31, REMOVAL, Manual Transmission As-
sembly.>
2) Remove the clutch cover and clutch disc. <Ref.
to CL-12, REMOVAL, Clutch Disc and Cover.>
3) Using ST1 and ST2, remove the flywheel.
ST1 498497100 CRANKSHAFT STOPPER
ST2 499057000 TORX
( A )
ST1
(A) Flywheel
2. KS AND K4 MODEL
1) Remove the transmission assembly. <Ref. to
5MT-31, REMOVAL, Manual Transmission As-
sembly.>
2) Remove the clutch cover and clutch disc. <Ref.
to CL-12, REMOVAL, Clutch Disc and Cover.>
3) Using the ST, remove the flywheel.
ST 498497100 CRANKSHAFT STOPPER
( A )
(A) Flywheel
B: INSTALLATION
1. EC, EK AND KA MODEL
1) Set the flywheel and ST.
Flywheel
®
PLUS
ST2
CL-00121
S T
CL-00019
ST 498497100
2) Tighten the flywheel mounting bolts to specified
torque.
ST 499057000
NOTE:
Tighten the flywheel installing bolts gradually. Each
bolt should be tightened to the specified torque in a
crisscross order.
Tightening torque:
"
72 N m (7.3 kgf-m, 52.8 ft-lb)
3) Install the clutch disc and cover. <Ref. to CL-12,
INSTALLATION, Clutch Disc and Cover.>
4) Install the transmission assembly. <Ref. to 5MT-
33, INSTALLATION, Manual Transmission Assem-
bly.>
2. KS AND K4 MODEL
1) Install the flywheel and ST.
ST 498497100
2) Tighten the flywheel attaching bolts to specified
torque.
CL-16
CRANKSHAFT STOPPER
ST
CL-00122
®
TORX PLUS
( 1 )
( 5 )
( 7 )
( 3 )
( 4 )
( 8 )
( 6 )
( 2 )
CL-00123
CRANKSHAFT STOPPER
S T
CL-00020