Subaru Legacy 2004 Service Manual page 2743

CLUTCH SYSTEM
10.Clutch Pedal
A: REMOVAL
1. LHD MODEL
1) Disconnect the ground cable from battery.
2) Remove the steering column. <Ref. to PS-23,
REMOVAL, Tilt Steering Column.>
3) Disconnect the connectors from the stop light
and clutch switches.
4) Remove the snap pins which secure lever to
push rod and operating rod.
5) Remove the clevis pins which secure lever to
push rod and operating rod.
(A)
(D)
(C)
(A) Operating rod
(B) Push rod
(C) Snap pin
(D) Clevis pin
6) Remove the nut which secures clutch master
cylinder.
7) Remove the bolts and nuts which secure brake
pedal and clutch pedal, and remove the pedal as-
sembly.
2. RHD MODEL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover.
Clutch Pedal
3) Remove the clutch pedal catcher from bracket
(clutch pedal catcher).
(D)
4) Remove the clutch switch connector from clutch
pedal.
5) Remove the snap pin and clevis pin which join
the push rod and clutch pedal.
(C)
6) Remove the master cylinder mounting nuts.
(B)
CL-00292
7) Remove the clutch pedal and bracket as a unit.
CL-00093
CL-26
(A)
(B)
(C)
(A) Bracket (Clutch pedal catcher)
(B) Clutch pedal catcher
(C) Clutch pedal
(D) Steering support beam
(A)
(A) Master cylinder
(A) Clutch pedal bracket
(B) Clutch pedal
(D)
CL-00274
CL-00216
(A)
(B)
CL-00126