Subaru Legacy 2004 Service Manual page 2783

REAR SUSPENSION
1. General Description
A: SPECIFICATION
Model
Wheel arch height
+12 mm
[Tolerance:
!24 mm (in)
+0.47 in
( )]
!0.94 in
mm
Camber (Tolerance: "0#45$%
Differences between RH and LH:
45$ or less)
Toe-in mm (in)
Thrust angle (tolerance: "0#30$&
Diameter of stabilizer mm (in)
NOTE:
• Front and rear toe-ins and front camber can be
adjusted. If the toe-in or camber tolerance exceeds
specifications, adjust them.
• Other items indicated in the specification table
cannot be adjusted. If other items exceeds specifi-
cations, check suspension parts and connections
for deformation, and replace with new ones as re-
quired.
(1) Front
A ! B = Positive: Toe-in, Negative: Toe-out
' = Each toe angle
General Description
Sedan
2.0 i, 2.5 i
360 (14.2)
!0#45$
0"3 (0"0.12) Toe angle (sum of both wheels): 0#"0#15$
17.3 (0.68)
B
(1)
A
FS-00001
2.0 GT, 3.0 R 2.0 i
0#
19.1 (0.75) 19.1 (0.75)
RS-2
Wagon
OUTBACK 2.5 i,
2.5 i
OUTBACK 3.0 R
375 (14.8)
!0#30$
20 (0.78)
430 (16.9)
0#00$
17.3 (0.68)