Subaru Legacy 2004 Service Manual page 2747

CLUTCH SYSTEM
3) Loosen the push rod lock nut.
(D)
(C)
(A) Clevis pin
(B) Snap pin
(C) Push rod
(D) Push rod lock nut
4) Turn the push rod to adjust.
(1) Ensure that the clutch pedal contacts clutch
switch, when releasing the clutch pedal.
(2) Ensure that the clutch pedal contacts clutch
pedal bracket stopper, when fully depressing
the clutch pedal.
(A)
(B)
(C)
(D)
(A) Clevis hole
(B) Push rod lock nut
(C) Shortening direction
(D) Lengthening direction
(E) Push rod
(F) U shaped bracket
Clutch Pedal
(A)
(B)
CL-00042
(F)
(E)
CL-00080
5) Turn the push rod counterclockwise to shorten
until clearance is made at clutch switch.
(A) Clutch switch
(B) Stopper
(C) Clearance
6) Turn the push rod clockwise to lengthen until
clutch pedal contacts to clutch switch.
7) Turn the push rod further 270° counterclockwise
to shorten (arrow direction as shown in the figure).
• LHD model
(A) Accelerator pedal
(B) Clevis
• RHD model
(A)
(A) Clutch pedal
(B) Brake pedal
8) Move the clevis pin in lateral direction to ensure
it moves smoothly.
CL-30
(C)
(A)
(B)
CL-00132
(B)
(A)
CL-00101
(B)
CL-00085