Operation Setting (Settings For Operation); Operation Setting Functions - Mitsubishi Electric GOT SIMPLE Series Operation Manual

24.2

Operation Setting (Settings for Operation)

Operation setting functions

Setting regarding GOT operation can be set.
The following items can be set. Touch each item to make the settings configurable.
Function
Buzzer volume
Window move buzzer
Key reaction
Calibration
Utility call
*1 At higher value set for [Key reaction], the slower the key responds.
"Key reaction" [ms]
For example, when the GOT recognizes touching the GOT screen once as touching the screen twice, set a higher value for [Key
reaction].
Operation setting by GT Designer3
Set buzzer volume and window move buzzer volume by selecting [Common]
[GOT Setup] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after downloading the
project data.
GT Designer3 (GOT2000) Screen Design Manual
24 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
224
24.2 Operation Setting (Settings for Operation)
Description
Buzzer volume setting can be changed.
Whether turn ON/OFF buzzer when move window can be selected.
The touch panel sensitivity when touching the GOT screen can be set. (For preventing
chattering)
Calibrates the touch panel sensitivity.
Page 227 Position correction of the touch panel (touch panel calibration setting)
Utility call key setting screen can be displayed.
Page 229 Setting the utility call keys
Standard ( 0) +10
±
+20 +40 +80
Setting range
OFF/SHORT/LONG
(At factory shipment: SHORT)
ON/OFF
(At factory shipment: ON)
*1
±0 to +120
-
-
+120
[GOT Environmental Setting]