Rfi Jumper - Delta C2000 Series User Manual

Chapter 1 Introduction
RFI Jumper: The AC motor drive may emit the electrical noise. The RFI jumper is used to suppress the
interference (Radio Frequency Interference) on the power line.
Frame A~C
Screw Torque: 8
~10kg-cm(6.9-8.7 lb -in.) ( 0.78~0.98 Nm)
Loosen the screws and remove the MOV-PLATE. Fasten the screws back to the original position after
MOV-PLATE is removed.
Frame D~H
Remove the MOV-PLATE by hands, no screws need to be loosen.
1-4