Delta C2000 Series User Manual page 584

API
TZCP
161
P
Bit device
X Y M K
S1
S2
S
D
Notes on operand usage:
Please refer to the function specifications table for each device in
series for the scope of device usage
S : Sets the lower limit of the comparison time. S
1
comparison time. S: current calendar time. D: Results of comparison.
Performs range comparison by comparing the hours, minutes, and seconds of the
current calendar time designated by S with the lower limit of the comparison time
set as S
results of comparison in D.
S
1
comparison time.
S
2
comparison time.
S S +1 S +2: The hours, minutes, and seconds of the current calendar time
The D0 designated by the S listed in this program is usually obtained by
comparison using the TZCP command after using the TRD command in advance to
read the current calendar time. If the value of S
considered an operating error, the command will not execute, and M1068=On.
When the current time S is less than the lower limit value S
upper limit value S
limit value S
will be On under other conditions.
X10
Word device
H KnX KnY KnM T
and the upper limit of the comparison time set as S
1
S +1 S +2: Sets the hours, minutes, and seconds of the lower limit of the
1 1
S +1 S +2: Sets the hours, minutes, and seconds of the upper limit of the
2 2
, D will be On. When the current time S is greater than the lower
2
and S is greater than the upper limit value S
1
When X10=On, the TZCP command executes, and one of M10-M12 will be
On. When X10=Off, the TZCP command will not execute, and M10-M12 will
remain in the X10=Off state.
TZCP D0
M10 D0 (hr)
D1 (min)
D2 (sec)
M11
D0 (hr)
D1 (min)
ON when
D2 (sec)
M12
ON when
Chapter 16 PLC Function Applications
Comparison of calendar data
16-bit command (9 STEP)
C D
TZCP Continuous
execution type
32-bit command
Flag signal: none
, S
1
D20 D10
D10 (hr)
> D11 (min)
D12 (sec)
D10 (hr)
< <
= =
D11 (min)
D12 (sec)
D10 (hr)
>
D11 (min)
D12 (sec)
16-93
C2000 Series
TZCPP Pulse
execution type
: Sets the upper limit of the
2
, and expresses the
2
, or S exceeds the range, this is
2
and S is less than the
1
, D +2 will be On; D +1
2
M10
D20 (hr)
D21 (min)
D22 (sec)
D20 (hr)
D21(min)
D22 (sec)