Delta C2000 Series User Manual page 167

Chapter 8 Optional Cards
Environment
Noise immunity
Operation /storage
Shock / vibration
resistance
PROFIBUS DP Connector
PIN
1
2
3
4
5
6
7
8
9
There are 2 LED indicators on CMC-PD01. POWER LED displays the status of the working
power. NET LED displays the connection status of the communication.
LED status
Green light on
Off
LED status
Green light on Normal status
CMC-PD01 is not connected to
Red light on
PROFIBUS DP bus.
Red light Invalid PROFIBUS communication
flashes address
Orange light CMC-PD01 fails to communication
flashes with AC motor drive.
ESD (IEC 61800-5-1, IEC 6100-4-2)
EFT (IEC 61800-5-1, IEC 6100-4-4)
Surge Teat (IEC 61800-5-1, IEC 6100-4-5)
Conducted Susceptibility Test (IEC 61800-5-1, IEC 6100-4-6)
Operation: -10ºC ~ 50ºC (temperature), 90% (humidity)
Storage: -25ºC ~ 70ºC (temperature), 95% (humidity)
International standards: IEC 61131-2, IEC 68-2-6 (TEST Fc)/
IEC 61131-2 & IEC 68-2-27 (TEST Ea)
PIN name
-
-
Rxd/Txd-P
-
DGND
VP
-
Rxd/Txd-N
-
Indication
Power supply in normal status.
No power
Indication
Definition
Not defined
Not defined
Sending/receiving data P(B)
Not defined
Data reference ground
Power voltage – positive
Not defined
Sending/receiving data N(A)
Not defined
--
Check if the connection between CMC-PD01 and AC
motor drive is normal.
--
Connect CMC-PD01 to PROFIBUS DP bus.
Set the PROFIBUS address of CMC-PD01 between 1 ~
125 (decimal)
Switch off the power and check whether CMC-PD01 is
correctly and normally connected to AC motor drive.
8-28
9
6
it?
How to correct
it?
How to correct
5
1