Delta C2000 Series User Manual page 263

Vector control drive

Hide thumbs Also See for C2000 Series:

Table of Contents

Chapter 12 Description of Parameter Settings

Control Mode

This parameter determines the control mode of C2000 series AC motor drive.

Control of Speed Mode

This parameter determines the control method of the AC motor drive:

0: (IM V/f control): user can design proportion of V/f as required and can control multiple

motors simultaneously.

1: (IM V/f control + Encoder): user can use optional PG card with encoder for the closed-loop

speed control.

2: (IM Sensorless vector control): get the optimal control by the auto-tuning of motor

When 00-10=0, and set Pr.00-11 to 0, the V/F control diagram is shown as follows.

Accel Decel tim e

0: Speed mode

1: Point-to-Point position control

2: Torque mode

3: Home mode

0: VF (IM V/f control)

1: VFPG (IM V/f control+ Encoder)

2: SVC(IM sensorless vector control)

DC BUS Voltage

com pensation

Compensation

Factory Setting: 0

Current Detection

Show Quick Links

Table of Contents