Delta C2000 Series User Manual page 337

Chapter 12 Description of Parameter Settings
AVI Selection
Settings
ACI Selection
Settings
When changing the input mode, please check if the switch of external terminal (SW3, SW4)
corresponds to the setting of Pr.03-28~03-29.
Status of PLC Output Terminal
Settings
P.03-30 shows the external multi-function output terminal that used by PLC.
For Example:
If the value of Pr.03-30 displays 0002h(Hex), it means AFM1and AFM2 are used by PLC.
AFM2 0-20mA Output Selection
Settings
0: 0-10V
1: 0-20mA
2: 4-20mA
0: 4-20mA
1: 0-10V
2: 0-20mA
0~65535
Monitor the status of PLC analog output terminals
0: 0-20mA output
1: 4-20mA output
12.1-03-23
Factory Setting: 0
Factory Setting: 0
Factory Setting: ##
Factory Setting: 0