Delta C2000 Series User Manual page 207

Vector control drive

Hide thumbs Also See for C2000 Series:

Table of Contents

Chapter 10 Digital Keypad

When fault occur, the menu will display:

1. Press STOP/RESET button to reset the fault code. If still no response, please contact local distributor or return

to the factory. To view the fault DC BUS voltage, output current and output voltage, press "MENU" "Fault

2. After reseting, if the screen returns to main page and shows no fault after pressing ESC, the fault is clear.

3. When fault or warning message appears, backlight LED will blinks until the fault or the warning is cleared.

Note: When you need to buy communication cables, buy non-shielded, 24 AWG, 4 twisted pair, 100 ohms

communication cables.

RJ45 extension lead, 3 feet (approximately 0.9m)

RJ45 extension lead, 5 feet (approximately 1.5 m)

RJ45 extension lead, 7 feet (approximately 2.1 m)

RJ45 extension lead, 10 feet (approximately 3 m)

RJ45 extension lead, 16 feet (approximately 4.9 m)

Comm. Error 1

Show Quick Links

Table of Contents