MKC-CFM Installation
1.
Install accessory 1& 2 by fastening 4 of the screw 1(M8). Screw torque: 50~55kg-cm (43.4~47.7Ib-in)
[4.9~5.39 Nm]. (As shown in the following figure)
2.
Plate installation, place 8 of the screw 2 (M6) through Accessory 1&2 and the plate then fasten the screws.
Screw torque: 25~30kg-cm (21.7~26Ib-in)[2.45~2.94Nm]. (As shown in the following figure)
Chapter 7 Optional Accessories
7-49