Conduit Box Installation
1.
Loosen the cover screws and press the tabs on each side of the cover to remove the cover, as shown in the
following figure. Screw torque: 12~15kg-cm (10.4~13 Ib-in) [1.18~1.47 Nm]
2.
Remove the 5 screws shown in the following figure. Screw torque:24~26kg-cm (20.8~22.6Ib-in) [2.35~2.55
Nm]
3.
Install the conduit box by fasten the 5 screws shown in the following figure.
Screw torque:24~26kg-cm (20.8~22.6Ib-in) [2.35~2.55 Nm]
4.
Fasten the 2 screws shown in the following figure. Screw torque: 12~15kg-cm (10.4~13 Ib-in) [1.18~1.47 Nm]
Chapter 7 Optional Accessories
7-25