Delta C2000 Series User Manual page 353

Chapter 12 Description of Parameter Settings
Rated Power of Permanent Magnet Motor
Settings
Set motor rated power in accord to motor nameplate. Default setting is motor drive rated power.
Rated speed of Permanent Magnet Motor
Settings
Pole number of Permanent Magnet Motor
Settings
Inertia of Permanent Magnet Motor
Settings
Default value will follow the chart
Rated Power
(kW)
Rotor inertia
2
(kg.cm )
Rated Power
(kW)
Rotor inertia
2
(kg.cm )
Rated Power
(kW)
Rotor inertia
2
(kg.cm )
Stator Resistance of PM Motor
Settings
Permanent Magnet Motor Ld
Settings
Permanent Magnet Motor Lq
Settings
PG Offset angle of PM Motor
Settings
When Pr.05-00 is set to 4, the drive will detect offset angle and write into Pr.05-42.
0.00~655.35 kW
0~65535 rpm
0~65535
2
0.0~6553.5 kg.cm
0.4 0.75
1.2 3.0
11 14.1 18.2
177.0 211.0 265.0
Above
54
1515.0
0.000~65.535
0.00~655.35 mH
0.00~655.35 mH
0.0~360.0°
2
(0.0001kg.m )
1.5 2.2 3.7
6.6 15.8 25.7
27 33
308.0 527.0
12.1-05-7
Factory Setting: 0.00
Factory Setting: 2000
Factory Setting: 10
Factory Setting: 0.0
5.5 7.5 9.3
49.6 82.0 121.6
40 46 54
866.0 1082.0 1267.6
Factory Setting: 0.000
Factory Setting: 0.00
Factory Setting: 0.00
Factory Setting: 0