Delta C2000 Series User Manual page 589

Chapter 16 PLC Functions Applications
API
GBIN
171
D
Bit device
X Y M
S
D
Notes on operand usage:
Please refer to the function specifications table for each device in
series for the scope of device usage
C2000 Series
P
Word device
K H KnX KnY KnM
S: source device used to store GRAY code. D: device used to store BIN value after
transformation.
The GRAY code corresponding to the value of the device designated by S is
transformed into a BIN value, which is stored in the device designated by D.
This command will transform the value of the absolute position encoder connected
with the PLC's input and (this encoder usually has an output value in the form of
GRAY code) into a BIN value, which is stored in the designated register.
The valid range of S is as shown below; if this range is exceeded, it will be
considered an error, and the command will not execute.
16-bit command: 0~32,767
32-bit command: 0~2,147,483,647
When X20=On, the GRAY code of the absolute position encoder connected
with input points X0 to X17 will be transformed into BIN value and stored in
D10.
X20
GBIN
GRAY CODE 6513
H1971=K6513
GRAY code
16-bit command (5 STEP)
GBIN
T C D
32-bit command (9 STEP)
DGBIN
Flag signal: none
K4X0 D10
K4X0
X17
0 0 0 1 0 1 0 1 1 1 0
b15
0 0 0 1 1 0 0 1 0 1 1
16-98
BIN transformation
Continuous GBINP
execution type execution type
Continuous DGBINP
execution type execution type
X0
0 1 0 0 1
b0
1 0 0 0 1
Pulse
Pulse