Delta C2000 Series User Manual page 75

Chapter 6 Control Terminals
Please remove the top cover before wiring the multi-function input and output terminals,
The drive appearances shown in the figures are for reference only, a real drive may look different.
Remove the cover for wiring. Frame A ~ H
Frame A & B
Loosen the screws and press the tabs on both
sides to remove the cover. Screw torque: 12~15
Kg-cm [10.4~13 lb-in.] (1.18~1.47 Nm)
Frame D
Screw torque: 12~15 Kg-cm [10.4~13 lb-in.] (1.18~1.47 Nm)
To remove the cover, lift it slightly and pull outward. Loosen the screws and press the tabs on both sides
to remove the cover.
Frame E
Screw torque: 12~15 Kg-cm [10.4~13 lb-in.] (1.18~1.47 Nm)
To remove the cover, lift it slightly and pull outward.
Frame C
Screw torque: 12~15 Kg-cm [10.4~13 lb-in.]
(1.18~1.47 Nm) Loosen the screws and press the
tabs on both sides to remove the cover.
6-4