Delta C2000 Series User Manual page 605

Chapter 16 PLC Functions Applications C2000 Series
Case 1: When bit 1 and bit 2 of 09-33 are both set as 0, and M1 is set as 0, the torque
command will remain at +30%, and the speed limit will be set as 40Hz.
Case 2: When bit 1 and bit 2 of 09-33 are both 1, and M1 is set as 0, the torque command will
revert 0%, and the speed limit will be set as 0Hz.
16-114