1.
Loosen the cover screws and press the tabs on each side of the cover to remove the cover, as shown in the
following figure. Screw torque: 12~15kg-cm (10.4~13 Ib-in) [1.18~1.47 Nm].
2.
Install the conduit box by fastens the 4 screws, as shown in the following figure.
Screw torque: 24~26kg-cm (20.8~22.6Ib-in) [2.35~2.55 Nm].
3.
Install the conduit box by fasten all the screws shown in the following figure
Screw 9~12 torque: 12~15kg-cm (10.4~13.6Ib-in) [1.18~1.47 Nm]
Screw 13~16 torque: 24~26kg-cm (20.8~22.6Ib-in) [2.35~2.55 Nm]
4
1
3
5
7
8
6
12
15
9
13
14
16
11
7-27
Chapter 7 Optional Accessories
2
10