Delta C2000 Series User Manual page 150

Vector control drive

Hide thumbs Also See for C2000 Series:

Table of Contents

External Power

Note: Refer to I/O & Rlay extension card installation/ disconnecting method for PG Card installation/ disconnecting.

Input power: 24V±5%

Maximum input current:0.5A

1) Do not connect control terminal +24V (Digital control signal common:

SOURCE) directly to the EMC-BPS01input terminal 24V.

2) Do not connect drive control terminal GND directly to the EMC-BPS01

input termina GND.

Function: When the drive only powered by EMC-BPS01, the

communication can be assured and support all communication cards and

following functions:

Parameters read and write

Keypad can be displayed

Keypad buttom can be operated (except RUN)

Analog input is effective

Multi-input (FWD, RV, MI 1~MI 8) needs external power supply to operate

Following functions are not supported

Relay output (including extension card) PGcard, PLC function

Chapter 8 Optional Cards

Descriptions

Show Quick Links

Table of Contents