Delta C2000 Series User Manual page 292

28 Emergency stop (EF1)
Signal confirmation for
29
Y-connection
Signal confirmation for
30
-connection
31 High torque bias
Middle torque bias
32
33 Low torque bias
Switch between
34 multi-step position and
multi-speed control
Chapter 12 Description of Parameter Settings
When the contact is ON, the drive will execute emergency stop and
display EF1 on the keypad. The motor won't run and be in the free
run until the fault is cleared after pressing RESET" (EF: External
Fault)
When is the contact of this function is ON, the drive will operate by
1st V/f.
When the contact of this function is ON, the drive will operate by
2nd V/f.
Refer to Pr.11-30~11-32 for details.
When the contact of this function is ON, the corresponding 15-step
speed for the multi-function inputs 1-4 will be 15 positions. (Refer to
Pr.04-16 to Pr.04-44)
Speed mode
Run
MI =d35
MI=d34
MI= d1
MI =d2
MI=d3
MI=d4
Output
f requency
12.1-02-6
Position mode
1 1 0 0
0 0 0
1 1 1 1
1 1 1 1
10-19
04-40 04-38
position multi-
mult i-
position
position
(Home)
12
13
Speed mode
0
04-11
12th s tep
speed
frequenc y