Delta C2000 Series User Manual page 276

Maximum Output Frequency
Settings 00.00~599.00Hz
This parameter determines the AC motor drive's Maximum Output Frequency. All the AC motor
drive frequency command sources (analog inputs 0 to +10V, 4 to 20mA, 0 to 20mAand ±10V) are
scaled to correspond to the output frequency range.
In light and normal duty: 0~599Hz
In heavy duty:0~300Hz
Output Frequency of Motor 1 base frequency and motor rated frequency
Output Frequency of Motor 2 base frequency and motor rated frequency
Settings 0.00~599.00Hz
This value should be set according to the rated frequency of the motor as indicated on the motor
nameplate. If the motor is 60Hz, the setting should be 60Hz. If the motor is 50Hz, it should be set
to 50Hz.
Output Voltage of Motor 1 base frequency and motor rated frequency
Output Voltage of Motor 2 base frequency and motor rated frequency
Settings 575V series: 0.0~600.0V
690V series: 0.0~720.0V
This value should be set according to the rated voltage of the motor as indicated on the motor
nameplate. If the motor is 575V, the setting should be 575.0. If the motor is 690V, it should be set
to 690.0.
There are many motor types in the market and the power system for each country is also
difference. The economic and convenience method to solve this problem is to install the AC
motor drive. There is no problem to use with the different voltage and frequency and also can
amplify the original characteristic and life of the motor.
Mid-point Frequency 1 of Motor 1
Settings 0.00~599.00Hz
Mid-point Voltage 1 of Motor 1
Settings 575V series: 0.0~600.0V
690V series: 0.0~720.0V
Mid-point Frequency 1 of Motor 2
Settings 0.00~599.00Hz
Chapter 12 Description of Parameter Settings
This parameter can be set during operation.
12.1-01-1
Factory Setting: 60.00/50.00
Factory Setting: 60.00/50.00
Factory Setting: 500.0/660.0
Factory Setting: 0.00
Factory Setting: 0.0/0.0
Factory Setting: 0.00