Ip Dns Forwarding - Allied Telesis x510-28GTX Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE

IP DNS FORWARDING

ip dns forwarding
Overview Use this command to enable DNS Relay, the forwarding of incoming DNS queries
for IP hostname-to-address translation.
Use the no variant of this command to disable the forwarding of incoming DNS
queries for IP hostname-to-address translation.
Syntax ip dns forwarding
no ip dns forwarding
Default The forwarding of incoming DNS query packets is disabled by default.
Mode Global Configuration
Usage DNS Relay requires that IP domain lookup is enabled. IP domain lookup is enabled
by default, but if it has been disabled, you can re-enable it by using the command
ip
See the
Examples To enable the forwarding of incoming DNS query packets, use the commands:
awplus#
awplus(config)#
To disable the forwarding of incoming DNS query packets, use the commands:
awplus#
awplus(config)#
Related clear ip dns forwarding cache
Commands
debug ip dns forwarding
ip dns forwarding cache
ip dns forwarding dead-time
ip dns forwarding retry
ip dns forwarding source-interface
ip dns forwarding timeout
ip name-server
show ip dns forwarding
show ip dns forwarding cache
show ip dns forwarding server
C613-50170-01 Rev B
OMMANDS
domain-lookup.
ip dns forwarding dead-time
configure terminal
ip dns forwarding
configure terminal
no ip dns forwarding
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command used with this command.
819