Allied Telesis x510-28GTX Command Reference Manual page 803

IP A P
DDRESSING AND ROTOCOL
SHOW ARP
Table 22: Parameters in the output of the show arp command
Related arp (IP address MAC)
Commands
clear arp-cache
C613-50170-01 Rev B
C
OMMANDS
Parameter
IP Address
MAC Address
Interface
Port
Type
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Meaning
IP address of the network device this entry maps to.
Hardware address of the network device.
Interface over which the network device is accessed.
Physical port that the network device is attached to.
Whether the entry is a static or dynamic entry. Static
entries are added using the
command. Dynamic entries are learned from ARP
request/reply message exchanges.
arp (IP address MAC)
803