Appendix 6.5 Positioning Test; Appendix 6.5 - Mitsubishi Electric MELSEC-L LD75P User Manual

Appendix 6.5

This function allows users to perform the following tests while monitoring the current status of the LD75.
• Positioning start test
• JOG/manual pulse generator/OPR test
• Speed change test
• Current value change test
(1) Positioning start test
Test operation is performed by specifying the positioning data No. or point No. of the block start data.
(a) Operating procedure
1.
Open the "Positioning Test" dialog box.
Display the "Positioning Test" window.
[Tool]  [Intelligent Function Module Tool]  [QD75/LD75 Positioning Module]  [Positioning/Test]
Monitor current values such
as the current feed value and
feedrate.
Test each function while
checking current values with
the monitor.
2.
Select the test target axis.
Select the test target axis from the pull-down menu of "Target Axis".
756
Positioning test